TLDR: Recommissioning a Massey Ferguson tractor after long-term storage requires careful inspection to ensure safe, reliable operation. This guide covers essential checks for batteries, fuel systems, fluids, filters, tyres, brakes and wiring, along with safe first-start procedures. Follow our practical checklist to prevent costly repairs and get your tractor working again. SAFETY WARNING: Never attempt to start or operate a tractor that has been stored for an extended period without first checking its brakes, steering, tyres, fluid levels and safety systems. Always follow the manufacturer's instructions. If you identify damaged components, leaks or unsafe operating conditions, consult a qualified tractor mechanic before use.
Whether your Massey Ferguson tractor has been parked up for the winter, stored in a shed for several years, or left unused between farming seasons, returning it to service requires more than simply turning the key.
Extended periods of inactivity can affect the battery, fuel system, engine oil, hydraulic components, tyres and brakes. Even a tractor that was running perfectly before storage may develop problems while standing idle.
Following a thorough Massey Ferguson tractor recommissioning checklist can help prevent costly breakdowns, protect essential components and ensure your tractor is safe to operate.
Here are the key checks to complete before bringing your Massey Ferguson back into use.
Â
-
Carry Out a Thorough Visual Inspection
Before attempting to start the engine, inspect the tractor for obvious signs of deterioration.
Pay particular attention to:
- Oil, fuel or coolant leaks beneath the tractor.
- Cracked, perished or loose rubber hoses.
- Rust or corrosion around mechanical components.
- Rodent nests, damaged wiring and blocked air intakes.
- Loose bolts, damaged guards and missing components.
- Debris around the radiator, cooling fan and engine compartment.
Rodents are particularly problematic during storage because they can chew through electrical wiring and build nests inside machinery.
According to Massey Ferguson’s tractor storage guidance, thorough cleaning and inspection help prevent corrosion, electrical damage and unnecessary downtime.
Remove any debris and resolve visible defects before proceeding.
-
Inspect and Recharge the Tractor Battery
A discharged or deteriorated battery is one of the most common problems encountered when restarting a stored tractor.
Over time, batteries naturally lose charge, particularly if connected to electrical systems during storage.
Before reconnecting the battery:
- Inspect the casing for swelling, cracks or leaks.
- Check terminals for corrosion and loose connections.
- Clean the terminals using appropriate battery-cleaning equipment.
- Test the battery voltage and condition.
- Recharge using a compatible battery charger.
A battery that repeatedly loses charge or struggles to crank the engine may require replacement.
Battery manufacturer Yuasa recommends monitoring charge levels during extended storage to prevent battery deterioration.
Always use the correct battery specification for your Massey Ferguson model.
-
Check the Diesel Fuel System
Diesel fuel can deteriorate during prolonged storage, particularly when moisture enters the tank through condensation.
Water contamination can encourage microbial growth, commonly called diesel bug, which may block filters, damage injection components and cause poor engine performance.
Inspect the fuel system for:
- Water or sediment in the fuel tank.
- Contamination in the fuel filter or water separator.
- Cracked fuel hoses and leaking connections.
- Corrosion around fuel pipes and fittings.
- Signs of microbial contamination.
If the fuel is contaminated or its condition is uncertain after prolonged storage, arrange appropriate draining, tank cleaning and replacement with fresh diesel.
Replace contaminated fuel filters and prime the system following the manufacturer’s instructions.
Never loosen high-pressure common-rail injection pipes to bleed the system.
-
Inspect Engine Oil and Other Fluids
Fluids can degrade or become contaminated even when a tractor is not operating.
Check the engine oil level and condition before starting. Milky oil may indicate water contamination, while unusual sludge or metal particles can suggest internal problems.
Also inspect:
- Transmission and gearbox oil.
- Hydraulic oil and reservoir levels.
- Front axle and differential lubricants.
- Engine coolant and antifreeze concentration.
- Brake and clutch fluid, where applicable.
Look for leaks around hydraulic pipes, seals and connections.
Replace fluids where their condition, age or service history makes this necessary, using the correct Massey Ferguson specifications.
The manufacturer’s AGCO Service and Information portal provides access to operator manuals containing model-specific servicing requirements.
-
Replace or Inspect Essential Filters
Filters are essential for protecting engine and hydraulic components against contamination.
During tractor recommissioning, check the condition and service history of the following:
- Engine oil filter: Replace when carrying out an oil change.
- Diesel fuel filters: Replace if contaminated or overdue for servicing.
- Engine air filter: Inspect for dust, moisture, rodent damage or blockage.
- Hydraulic filters: Replace according to condition and service requirements.
- Cab air filters: Inspect for dust, mould and accumulated debris.
Avoid unnecessarily opening sealed hydraulic systems, as this can introduce contamination.
Using correctly specified Massey Ferguson replacement filters helps maintain filtration performance and protects sensitive components.
-
Check Tractor Tyres and Wheels
Long-term storage can cause tyres to lose pressure, develop flat spots or deteriorate through exposure to sunlight and environmental conditions.
Check each tyre for visible sidewall cracking, bulges, cuts and abnormal deformation. Inflate tyres to the recommended pressures for the tractor, tyre specification and intended load.
Also inspect wheel rims for corrosion and ensure wheel nuts are correctly secured.
Tyre manufacturer Continental provides agricultural tyre technical guidance covering maintenance, inflation and storage. Severely cracked or damaged tyres should be professionally inspected before the tractor is driven.
-
Inspect Brakes, Steering and Hydraulic Controls
Braking components may seize or deteriorate while a tractor remains unused. Before moving the tractor, check that the brake pedals, parking brake and steering operate correctly.
Inspect accessible brake components and hydraulic connections for deterioration or leakage.
Where fitted, confirm that individual brake pedals operate correctly and can be locked together for road travel. Check hydraulic lift controls, external hydraulic couplings and the three-point linkage for damage.
The Irish Health and Safety Authority’s tractor safety guidance emphasises maintaining effective brakes, steering, hydraulics and protective guards.
Any significant braking or steering fault must be repaired before operating the tractor.
-
Inspect Electrical Wiring and Safety Systems
Electrical faults are another common consequence of long-term tractor storage. Examine wiring harnesses for rodent damage, brittle insulation, corrosion and loose connectors.
Test the lights, indicators, horn, dashboard warning lights and other electrical equipment. Check the starter connections and ensure electrical components remain securely mounted.
On newer Massey Ferguson tractors, electronic sensors, control modules and wiring connectors may require additional attention.
Never bypass safety switches or protective interlocks to start the tractor.
-
Prepare for the First Engine Start
Once inspections and servicing are complete, prepare for the tractor’s first start-up.
Before turning the ignition key:
- Ensure the gearbox and controls are in neutral.
- Engage the parking brake and secure the tractor against movement.
- Disengage the PTO and lower any attachments.
- Confirm all guards are fitted and the area is clear.
- Prime the fuel system if necessary.
- Check coolant and engine oil levels again.
- Follow any model-specific lubrication or pre-start procedures.
Start the engine from the operator’s seat in a well-ventilated outdoor area. Allow the engine to idle initially without applying a heavy load. Monitor oil-pressure warnings, coolant temperature, unusual noises, excessive smoke and fluid leaks.
If an abnormal warning appears or oil pressure fails to establish, stop the engine immediately. The UK Health and Safety Executive recommends thorough machinery checks and following safe operating procedures before agricultural equipment is returned to use.
-
Complete a Controlled Test Drive
Once the engine reaches its normal operating condition and no faults are apparent, carry out a short test drive in a clear, level area. Test steering response, clutch operation, service brakes and parking brake.
Gradually check the transmission, hydraulic lift and other functions without immediately applying heavy workloads. After the test, park safely, stop the engine and inspect for fresh leaks, loose connections or unusual temperatures.
Recheck fluid levels once the machine has cooled, following the operator’s manual.
Suggested replacement parts
For a tractor returning to service, the following parts may require replacement depending on their age and condition:
- Engine oil, fuel, air and hydraulic filters
- Tractor battery and battery terminals
- Diesel fuel hoses and seals
- Radiator hoses and coolant – water hoses, air hosesÂ
- Fan belts and auxiliary drive belts
- Brake seals and hydraulic components
- Damaged electrical wiring and connectors
Final Thoughts: Bringing Your Massey Ferguson Back to Work Safely
Recommissioning a Massey Ferguson tractor after long-term storage should always involve a systematic inspection rather than an immediate engine start.
Checking the battery, diesel system, fluids, filters, tyres, brakes and wiring can help identify hidden problems before they become expensive repairs.
For tractors that have been standing for several years, professional inspection may be particularly worthwhile.
At NMT Group, we understand the importance of keeping Massey Ferguson tractors operating reliably. Whether you need replacement filters, batteries, fuel system components, hydraulic parts or other essential spares, sourcing the correct components is an important part of successful tractor maintenance.
Explore our range of Massey Ferguson tractor parts to help get your tractor ready for work again.


